Activity

Therefore, the flexible and easily separated PG@NZL nanocomposite fibrous membrane is a promising adsorbent for effectively treating phosphate-bearing wastewater.Chemical biosensing techniques are essential for food analysis and disease diagnosis. Nanomaterials with redox activity show great potential in electrochemical analysis, acting as signal labels or signal amplification unit, which can reflect the targets concentration in foods and biological samples. Here, an ultra-sensitive dual-signal intrinsic self-calibration electrochemical platform for GSH was firstly fabricated based on the novel electroactive nanomaterial of ferrocene-functionalized copper metal-organic framework (Fc-Cu-MOF). Due to the solid-state electrochemical property of cuprous chloride (CuCl), a sharp characteristic peak with an increased signal appears with the coexistence of chloride ions in solution. The stronger specific affinity between Cu+ and GSH than that of Cu+ and Cl- triggers a “crowding effect” that causes the current signal of CuCl decrease greatly. Meanwhile, the peak current of ferrocene keeps unchanged as an internal reference. Based on the ratio of the peak current variation (ΔICu/ΔIFc) as the signal output, Fc-Cu-MOF modified electrode showed wider linear range in 0.1 nM -1 μM for GSH with the detection limit as low as 0.025 nM. And the sensor was successfully applied in the determination of GSH with excellent recoveries in various real samples such as food and serum samples, providing good prospect in application of bioanalysis and food screening.

The conventional solid-solid contact is well studied in the literature. However, a number of practical applications, such as adhesive patches and biomimetic surfaces, require a much deeper understanding of soft contact where there is a distinct time-dependent adhesion behavior due to the dual-phase structure (solids and liquids). To understand this, currently existing solid-solid contact behavior is extrapolated to soft contact, wherein the size-effect of the gel film and the preload are typically neglected. When introducing the finite-size effect and preload, gels could experience distinctive long-term contact dynamics in contact with another material.

We reconstruct the evolving surface profile of the gel films intercalated between a glass sphere and glass slide using dual wavelength-reflection interference contrast microscopy. The macro-sized glass sphere compresses the gel. The indentation depth is comparable to the gel film thickness, wherein the conventional contact theories are inapplicable.

The gel surface experiences two deformation stages. The natural preload and elastic force develop the contact area in the early state. In the later state, the viscous free molecules of the gel develop the ridge. We discover that the residual surface stress relaxes over 85 hr. Our findings on the long-term gel deformation provide a new perspective on soft adhesion, from developing soft adhesives to understanding biological tissues.

The gel surface experiences two deformation stages. The natural preload and elastic force develop the contact area in the early state. In the later state, the viscous free molecules of the gel develop the ridge. We discover that the residual surface stress relaxes over 85 hr. Our findings on the long-term gel deformation provide a new perspective on soft adhesion, from developing soft adhesives to understanding biological tissues.Rough structures have gained increasing attention since they are essential for surfaces with special wettability, which can be used for various applications. It is still a challenge to find a low-cost and simple way to fabricate rough surfaces despite extensive efforts. Herein, we report a facile strategy to fabricate self-roughened surfaces based on polarity-induced phase separation. The strategy relies on the migration of flexible chains of the nonpolar polysiloxane to airside, driven by surface tension and polarity difference with the polar crosslinker, which forms a self-roughened surface with numerous protrusions. It is worth noting that this strategy does not require strict control of procedures, since it is insensitive to environmental changes unlike other phase separation methods, as shown by the results of systematic studies on several key parameters. Modified fabrics and coatings exhibit excellent superhydrophobicity with a water contact angle higher than 160°. Moreover, due to the strong hydrogen bonds formed by the polar urea groups of the crosslinker with substrates, the abrasion resistance of the coating is significantly enhanced. It is believed that the proposed novel and facile strategy will be a promising candidate for industrial manufacturing.Utilizing solar energy to convert carbon dioxide (CO2) into chemical fuels could simultaneously mitigate the greenhouse effect and fossil fuel crisis. Herein, a heterogeneous photocatalyst of ZnO nanofiber deposited by Pt nanoparticles was successfully synthesized toward photocatalytic CO2 reduction via radio-frequency thermal plasma and photo-deposition method. The Pt nanoparticles were introduced on the surface of ZnO nanofibers to broaden the light absorption and utilization, increase the additional reaction active sites and facilitate the separation of photo-generated electron/hole pairs. Combined with the natural advantages of short transfer path of charge carriers and self-support effecting in humid reaction environment for nanofibers, the Pt/ZnO hetero-junction nanocomposites displayed superior photocatalytic activity for CO2 reduction with respect to bare ZnO nanofibers, affording a CO-production rate as high as 45.76 μmol g-1 h-1 under 300 W Xe lamp irradiation within a gas-solid reaction system. Furthermore, in-suit Fourier transform infrared (FTIR) spectra were applied to unveil the details during photocatalytic CO2 reduction. This work presents a hetero-junction nanocomposite photocatalyst based on eco-friendly semiconductor and metal materials.Conductive metal inks with 3D-printable rheological properties have gained considerable attention, owing to their potential for manufacturing 3D electronics. Typically, such inks are formulated with high volume fractions of metal particles to achieve both rheological and electrical percolation. However, this leads to a high product cost and weight, making this approach potentially undesirable for practical application. In this study, naturally occurring ingredients, i.e., bee pollen microparticles (BPMPs) and citric acids (CAs), are used to produce a jammed hexane-in-aqueous suspension-type emulsion with controllable viscoelasticity as a template for conductive metal particles. Correspondingly, it is possible to develop 3D-printable, lightweight, and conductive inks. The BPMPs and CAs, as rheology modifiers, facilitate the 3D printability of the ink. After drying, the ink forms 3D networks without macroscopic discontinuities. Hexanes co-dispersed with BPMPs and CAs in the aqueous continuous phase improve the ink rheological processability and create internal macropores within the 3D-printed structure upon evaporation under ambient conditions, decreasing the product density. A conductive copper ink based on the emulsion template shows excellent 3D printability and electrical percolation at low metal loadings ( less then 10 vol%); moreover, the printed ink with the optimized formulation has a remarkably low density ( less then 2 g ∙ cm-3).Cytokeratin 10 (CK10) is a type I acidic low molecular weight cytokeratin which is mainly expressed in keratinizing squamous epithelium of the skin. learn more Variable levels of CK10 protein have been described in squamous carcinomas of different sites and in some other epithelial neoplasms. To comprehensively determine the prevalence of CK10 expression in normal and neoplastic tissues, a tissue microarray containing 11,021 samples from 131 different tumor types and subtypes was analyzed by immunohistochemistry. CK10 immunostaining was detectable in 41 (31.3 %) of 131 tumor categories, including 18 (13.7 %) tumor types with at least one strongly positive case. The highest rate of positive staining was found in squamous cell carcinomas from various sites of origin (positive in 18.6 %-66.1 %) and in Warthin tumors of salivary glands (47.8 %), followed by various tumor entities known to potentially exhibit areas with squamous cell differentiation such as teratomas (33.3 %), basal cell carcinomas of the skin (14.3 %), adenosquamous carcinomas of the cervix (11.1 %), and several categories of urothelial neoplasms (3.1 %-16.8 %). In a combined analysis of 956 squamous cell carcinomas from 11 different sites of origin, reduced CK10 staining was linked to high grade (p less then 0.0001) and advanced stage (p = 0.0015) but unrelated to HPV infection. However, CK10 staining was not statistically related to grade (p = 0.1509) and recurrence-free (p = 0.5247) or overall survival (p = 0.5082) in 176 cervical squamous cell carcinomas. In the urinary bladder, CK10 staining occurred more commonly in muscle-invasive (17.7 %) than in non-invasive urothelial carcinomas (4.0 %-6.0 %; p less then 0.0001). In summary, our data corroborate a role of CK10 as a suitable marker for mature, keratinizing squamous cell differentiation in epithelial tissues. CK10 immunohistochemistry may thus be instrumental for a more objective evaluation of the clinical significance of focal squamous differentiation in cancer.Phenanthrene (Phe), one of the most commonly detected polycyclic aromatic hydrocarbons, poses a potential threat to marine ecosystems due to its strong toxicity to aquatic organisms. Developing marine water quality criteria (WQC) is critical to effectively control Phe pollution. This study conducted 10 acute toxicity tests and 4 chronic toxicity tests using native species in the Bohai Sea, China and found that the half-lethal/effective concentrations (LC50/EC50) of Phe for all tested organisms were in the range of 0.198-50.142 mg/L. Among them, the mysid Neomysis awatschensis was the most sensitive species, and the rotifer Brachionus plicatilis was the least sensitive. In terms of chronic toxicity, the range of no-observed-effect concentrations (NOECs) for the four tested organisms was 0.0156-4.00 mg/L. Based on the toxicity data and other data collected from existing databases and literature, the established species sensitivity distribution (SSD) model revealed that the marine WQC for Phe was 39.55 μg/L. Furthermore, the reliability of the derived criteria was verified by measuring multiple endpoints of Skeletonema costatum and Brachionus plicatilis after chronic exposure to Phe. Finally, the environmental concentrations of Phe in the Bohai Sea were determined to be 8.0-318 ng/L, and the joint probability curve (JPC) results showed that the ecological risk of Phe was acceptable. This study provides a reference for developing seawater quality standards for Phe.Titanium (Ti) is considered a contaminant of emerging interest, as it displays toxic potential and has been increasingly employed in everyday products, pharmaceuticals, and food additives, mainly in nanoparticle form. However, several knowledge gaps are still noted, especially concerning its dynamics in the water. In this context, this study aimed to quantify total Ti concentrations in highly consumed swimming crabs, squid, and shrimp from an important estuary located in southeastern Brazil. Ti concentrations were higher than those reported in most studies carried out worldwide. Animal length and weight, as well as, depth, transparency, dissolved oxygen, and salinity, significantly influence Ti concentrations in the animals. Human health risks were also noted after calculating a simulated exposure to titanium dioxide, especially considering the uncertainties regarding the effects of this element and the absence of regulatory limits.