Activity

Ready to begin with your own plumbing jobs? Do you know where to start or how to begin? Do you know what equipment and techniques will work for your next task? Well, the tips that are listed below may be the very ones that you need.

Pump your septic tank every five years to keep it working well. This prevents sediment from building up in the tank and causing a backup into your home or causing the failure of the septic system itself. Although it is somewhat of an expense to pump out a septic tank, it is nothing compared to what you will have to spend on cleaning up a backup of sewage or repairing or replacing your septic system.

To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.

Don’t shrug off that trickle coming from your toilet as a small problem. Even the tiniest leak can be quite expensive in the long run as you end up wasting potentially hundreds of gallons of water. See if you can find the root of the leak, or seek out professional advice, and keep your toilet running efficiently.

DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.

One way to prevent water heater problems is to turn down the heat. As long as the water is still as hot as needed for showers and washing dishes, turning it down won’t hurt anything, and will extend the life of the heater. Holding very hot water can corrode the inside.

If you have a lot of hair in your shower drain, be sure to get a stopper and put it in the drain. This will catch the hair from going down the drain, which can clog it. Just make sure that you remove hair that is already in the drain before using the stopper.

Valves that are rarely used tend to fuse together. Use penetrating oil to maintain them and run water through them once in a while.

If the pipes have burst in an upstairs area, use a tool to perforate the ceiling underneath in several places and places pots and pans under to catch the water. If this is not done, the weight of the accumulating water could cause a collapse of the entire ceiling.

Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.

Check to make sure that the walls behind the tiles in your bathroom are not soft. Push into the tiles to confirm that the foundation is firm and robust. If the area is delicate and brittle, there is a good chance that water has created damage behind the tiles over time.

If you have a leak and your water bill is going up, there is a method you can try before you call a professional. You can use the red-dye system to detect whether the leak is above ground, underground, or whether it has anything to do with the toilets.

Many people complain of low water pressure. While there are several things that can cause this, one must not be overlooked when starting your investigation. What kind of pipes do you have? If your piping is galvanized, you are better off just replacing your piping which will eliminate the issue.

Fair enough, you’re not going to become an expert overnight – but there are surely one or two pieces of advice here that you can use. Every job that you do yourself is one less job that you have to pay someone else to do!